In this guide, we will show you how to find a Wi-Fi network on Windows 10 from the Settings menu. We also have additional tips at the end of this article for troubleshooting your issue and a full list of commands to try if nothing else works.
The “particular wifi network not showing in windows 10” is a problem that has been present for a while. There are many solutions to fix the issue, but this guide will show you how to do it by hand.
Ivan Jenic’s contribution
Expert in Troubleshooting
Ivan has dived deep into knowing this operating system, with a specialize in drivers and driver problems, thanks to his passion for all things Windows and his natural curiosity. When he isn’t tackling, he is… Continue reading
This page was last updated on November 3, 2021.
Publish date: August 2020
- Wi-Fi and Internet connection issues are perhaps the most prevalent issues with Windows 10.
- In the post below, we have no less than 20 answers to this issue.
- If you have frequent Internet connection issues, save our Network & Connectivity section to your favorites.
- If you need to troubleshoot any other Windows 10 issues, head visit the Troubleshooting Hub.
BY CLICKING ON THE DOWNLOAD FILE, YOU CAN INSTALL XINSTALL.
We propose Restoro PC Repair Tool to address a variety of PC issues: This program will fix common computer faults, protect you against file loss, viruses, and hardware failure, and optimize your PC to run at its best. In three simple actions, you can immediately fix PC problems and eradicate viruses:
- Download the Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
- To detect Windows faults that may be causing PC difficulties, click Start Scan.
- To correct problems that are hurting your computer’s security and performance, click Repair All.
- This month, 0 readers have downloaded Restoro.
The most prevalent difficulties that Windows 10 customers have are WiFi and internet connectivity troubles. And we can all agree that nothing is more inconvenient for a typical internet user than Wi-Fi difficulties.
There are a variety of Wi-Fi faults that may occur, and we’ll attempt to cover as many as possible in this post.
While using Windows 10, you might run into dozens, if not hundreds, of different Wi-Fi difficulties. The following are some of the most prevalent problems:
- Available networks aren’t shown in Windows 10 – This error occurs when a network issue hinders the display of accessible WiFi networks.
- No connections are available in Windows 10 – This issue occurs when there are no connections to connect to. Even if you know there are some accessible connections, it tends to show up.
- The problem “Windows 10 can’t connect to this network” appears when you are unable to connect to a certain WiFi network. You may combine solutions from that article with solutions from this article, since we have an article devoted to this topic. Hopefully, you’ll be able to discover a suitable answer.
- No WiFi icon in Windows 10 – This mistake occurs when there is no WiFI icon on the taskbar at all.
- When your WiFi connection in Windows 10 suddenly stops functioning, you’ll see this error.
- Wi-Fi on Windows 10 won’t switch on — You can switch on WiFi from your taskbar if you see this issue.
- WiFi yellow triangle on Windows 10 – This issue indicates that there is a problem with the connection itself. It is possible to connect to it, however bandwidth is frequently an issue.
- WiFi on Windows 10 is greyed out — This issue stops you from using your WiFi connection in any way. You can’t switch it on, change the settings, or do anything with it.
What should I do if my Wi-Fi connection fails?
Contents: Table of Contents
- Drivers for networking should be updated.
- TCP/IP should be reset.
- On your modem, change the wireless SSID and password.
- Examine for malware.
- Your modem should be reset (and more)
- Use the troubleshooter for Internet Connections.
- Ensure that DHCP is enabled.
- Manually configure your IP address
- Increase or decrease the number of DHCP users
- Temporarily disable Firewall in Windows
- Turn off the airplane mode.
- Use the /release ipconfig command to release your IP address.
- Set the width of the channel to Auto.
- IPv6 should be disabled on your PC and network.
- Remove your wifi profile from your computer
- Turn off the Family Safety function.
- Turn off your antivirus program.
- Switch to a different wireless network mode
- Fiddler on the Roof settings
- Make sure that all of the essential services for sharing an Internet connection are turned on.
1. Install the latest network drivers
Updating your WiFi driver is another frequent remedy for numerous network troubles. If you’re not sure how to accomplish it, here are some instructions:
- Open the Device Manager by right-clicking the Start button.
- Expand Network Adapters by locating them and expanding them.
- Right-click your network devices and choose Update driver software from the drop-down menu. Ensure that both LAN and WLAN adapters are used.
- Wait for the procedure to complete, then restart your computer and attempt connecting again.
If Windows is unable to locate and download updated drivers automatically, see our detailed tutorial on how to do it manually.
If the issue persists, return to Device Manager > Network Adapters and do the following steps:
- Open Properties by right-clicking Network Adapters.
- Uninstall the driver from the driver tab.
- Now choose Hardware Ids from the drop-down list in the Details tab.
- Copy and paste the first line into your browser.
- Locate the appropriate drivers from the authorised hardware manufacturer.
- Both the LAN and WLAN drivers should be downloaded and installed.
- Start your computer again. and double-check your connection.
Additionally, using specialist applications to address driver difficulties is a useful option. After scanning your PC to check which drivers are out of date and which are not, you may update drivers automatically.
You may depend on a third-party service to do this in a matter of minutes. Problems with drivers are ideal for a strong solution like DriverFix.
TCP/IP should be reset.
- Go to Search, type cmd, right-click it, and choose Command Prompt from the drop-down menu (Admin).
- Type the following commands in the command line, pressing Enter after each one:
- int ip reset netsh
- set heuristics disabled netsh int tcp
- set global autotuninglevel=disabled netsh int tcp
- set global rss=enabled netsh int tcp
- Restart your computer and attempt to connect again. If the issue persists, please sure to attempt the additional procedures listed below.
TCP/IP isn’t working in Windows 10? To repair the problem, go through this simple instructions.
Resetting the TCP/IP stack is the first thing we’ll attempt. This is one of the most typical fixes for network troubles in Windows, and it may also assist with other internet problems.
3. On your modem, change the wireless SSID and password.
Changing your modem’s wireless SSID and password is another typical technique for resolving WiFi and network difficulties.
Even though we’re talking about fixing an issue with your wireless network, you’ll need to use an Ethernet cable to connect your computer to the modem for this solution.
We can’t tell you exactly how to change the SSID since the technique differs from modem to modem. As a result, we suggest consulting your modem’s handbook or searching the internet for further information.
4. Run a malware scan
Your connection, in contrast to the prior remedy, may be compromised by malware. As a result, it’s a good idea to rerun your security scan.
If your computer has connection-blocking malware, your antivirus will undoubtedly remove it.
It is strongly advised that you use a robust antivirus that can detect and remove sophisticated threats. As a result, you may select among the finest antivirus software for Windows 10 PC to further safeguard your system.
5. Clear your modem’s cache (and more)
Now we’ll move on to more fundamental remedies, which will almost certainly be the first thing you try. To troubleshoot your modem/router, you’ll need to do the following steps:
- Turn off your modem or router. Wait a minute before turning it on.
- Temporarily disable the modem/built-in router’s firewall.
- Restore factory settings to the modem/router.
- Check to see if your network or modem is overheating. It should be kept away from heat sources.
Again, if you’re not sure how to do anything, consult your router/modem handbook for further information.
You may also try updating the firmware on your router. If you’re not sure how to do it, we’ve put up a handy guide to assist you.
6. Use the Troubleshooter for Internet Connections
- Go to the Settings menu.
- Update & Security are both open.
- To troubleshoot, go to Troubleshoot.
- Select Internet Connection Troubleshooter from the drop-down menu.
- Now, follow the wizard’s on-screen directions and wait for it to complete.
- Restart your computer
If you’re using Windows 10 version 1703 (Creators Update), the Settings app now has a new troubleshooting option. This Troubleshooter may be used to fix a variety of issues with the system, including the WiFi problem we’re discussing.
If you’re experiencing difficulties launching the Settings app, read this article to figure out how to fix it.
7. Ensure that DHCP is enabled.
Expert Tip: Some PC problems, such as damaged repositories or missing Windows files, are difficult to resolve. If you’re having problems repairing a mistake, it’s possible that your system is partly broken. Restoro is a tool that will scan your computer and determine the source of the problem. To download and begin mending, go here.
Let’s discuss about DHCP now. In a nutshell, DHCP is a Windows function that allocates your computer an IP address when you join to a network.
As a result, if this procedure is deactivated, your computer will be unable to receive an IP address and so will be unable to access to the internet through your WiFi connection.
So, the first thing we’ll do is check to see whether this process is active. And here’s how you can do it:
- Connect to the Internet.
- Locate your network adapter, right-click it, and choose Diagnose from the menu that appears.
- Wait for the procedure to complete. This will re-enable the DHCP procedure if it was previously deactivated.
8. Manually configure your IP address
- Select Connections to the Internet from the Settings menu.
- Choose Properties from the menu when you right-click your wireless network.
- Go to Properties and choose Internet Protocol Version 4 (TCP/IPv4).
- Choose Use the following IP address and fill in the IP address, Subnet mask, and Default gateway.
- We utilized setup settings that worked for us, but you may need to use a different number (see the screenshot).
- You’ll also have to manually input the DNS server.
- We used Google’s Public DNS in this example, but you may alternatively use 192.168.1.1 as your Preferred DNS server.
- Click the OK button when you’re finished.
9. Increase or decrease the number of DHCP users
Finally, adjusting the number of DHCP users is a solution that includes the DHCP process. In your router’s settings, you’ll need to raise the amount of DHCP users. DHCP users are usually limited to 50, and if you exceed that number, WiFi difficulties may arise.
Because the procedure for altering the number of DHCP users differs from router to router, it’s best to consult the handbook for specific instructions.
10. Temporarily disable Windows Firewall
Even while Windows Firewall is an important component for your system’s overall security, it might interfere with your network connection. As a result, we’re going to turn off Firewall for the time being and see what happens. Here’s how you can do it:
- Activate the Control Panel.
- Select System and Security from the drop-down menu.
- Select Windows Firewall from the drop-down menu.
- From the left side, choose Turn Windows Firewall on or off.
- Confirm that Windows Firewall is turned off for both private and public networks.
- Your computer should be restarted.
- Make an attempt to connect.
Windows 10 won’t let you access the Control Panel? To discover a solution, check through this step-by-step instructions.
11. Turn off the airplane mode on your phone.
Many customers have complained that Airplane mode has disabled their WiFi connection, as implausible as it may sound. As a result, ensure sure the Airplane mode is turned off.
The Airplane mode symbol may be found in the Notification panel in the taskbar’s right corner. If the icon isn’t present, you may deactivate it using the following method:
- Open the Settings menu.
- Select Network & Internet from the drop-down menu.
- Select Airplane mode from the drop-down menu.
- Turn off the airplane mode.
12. Use the ipconfig /release command to release your IP address.
- Open Command Prompt by going to Search and typing cmd (Administrator)
- Enter the following lines into Command Prompt and press Enter after each line to execute it:
- ipconfig /release
- /renew ipconfig
- Try connecting again after restarting your computer.
13. Select Auto as the channel width.
- Select Network Connections from the menu by right-clicking the Start Menu button.
- Right-click your wireless connection in the Network Connections box and choose Properties from the menu.
- Go to the Advanced tab by clicking the Configure button.
- 802.11n Channel Width for Band 2.4 should be set to Auto.
- To save your changes, click OK.
14. Turn off IPv6 on your network and machine.
- The Open Network and Sharing Center is an open network and sharing center.
- Select your current connection from the Connections menu.
- The window for checking the status of your connection will appear. Select Properties from the drop-down menu.
- Uncheck the box next to Internet Protocol Version 6 (TCP /IPv6).
- To save the changes, click the OK button.
- To make the modifications take effect, restart your computer.
Enabling the IPv6 protocol may help solve internet difficulties in certain circumstances, but it might also create problems in others.
15. Remove your wifi profile from your computer.
- Go to Search, type cmd, right-click it, and choose Command Prompt from the drop-down menu (Admin).
- Enter netsh wlan remove profile name=WirelessProfileName in Command Prompt Stats and click Enter.
- Make sure that WirelessProfileName is replaced with the name of your wireless connection.
- Make sure that WirelessProfileName is replaced with the name of your wireless connection.
- After the procedure is completed, you must rejoin and reconfigure your network to reestablish the connection.
If your Wireless Profile becomes corrupted, the easiest method to bring things back to normal is to erase it and recreate it.
16. Turn off the Family Safety function.
- Go to https://account.microsoft.com/family to get started.
- Use your Microsoft account to log in.
- Click the Remove button next to the account you wish to delete. Make careful to delete any minor accounts before removing the adult account.
We don’t advocate deactivating the Family Safety function unless it’s absolutely necessary. However, it’s possible that this function may disable your wifi connection. You have no option but to deactivate it in such situation.
17. Turn off your antivirus program.
This is probably not the first time you’ve heard of it. Third-party antivirus applications don’t get along with Windows 10 and its components and features.
Various issues may arise as a result of the interference. This includes our issue with the WiFi network. So, turn off your antivirus application for a while and see whether the connection works now.
Consider switching to Windows Defender or changing your antivirus solution if you can connect to your WiFi network properly with your antivirus application deactivated.
If you’re concerned about the absence of antivirus protection, read on to learn why Windows Defender is the only malware protection you’ll ever need.
18. Switch to a different wireless network mode
- The Open Network and Sharing Center is an open network and sharing center.
- Right-click your wireless network adapter, pick Properties from the menu, and then click Change adapter settings.
- Click the Configure button when the Properties window appears.
- Select Wireless mode from the Advanced tab’s list.
- Now alter the value of Wireless mode to match the value on your router’s Wireless mode. 802.11b (or 802.11g) should work in most circumstances, but if it doesn’t, try trying with other alternatives.
To function together, your router and wireless adapter must be in the same network mode. If this isn’t the case, you’ll have trouble connecting to the internet.
To make the connection function again, you need verify the wireless networking mode on your computer.
19. Modify Fiddler’s options
This one, of course, is solely for Fiddler users. Changing Fiddler’s settings, according to some users, may also cure the problem. Here’s how you can do it:
- Select Fiddler Options from the Tools menu.
- Toggle to the HTTPS tab.
- Make sure the wording reads CertEnroll engine produced certificates.
- Reset Certificates may be found under Actions > Reset Certificates. Wait for the procedure to finish.
- All prompts should be accepted.
20. Verify that all essential services for sharing an Internet connection are turned on.
To do so, go to Search > put services.msc into the search box > choose Services. Now all you have to do is make sure these services are up and running:
- Simply plug in and play
- Gateway Service for the Application Layer
- Call for a Remote Procedure (RPC)
- Network Connections
- Location Awareness in the Network (NLA)
- Telephony
- Connection Manager for Remote Access
- Auto Connection Manager for Remote Access
- Windows Firewall
The WiFi network, as we said in some of the earlier solutions, needs specific services to function successfully. As a result, you must ensure that each of these services is operational.
That’s all there is to it. We really hope that at least one of these methods assisted you in resolving your WiFi connectivity issue. Please let us know if you have any further comments, questions, or recommendations in the comments section below!
Are you still experiencing problems? Use this tool to fix them:
- Download this TrustPilot.com-rated PC Repair Tool (download starts on this page).
- To detect Windows faults that may be causing PC difficulties, click Start Scan.
- To repair faults with Patented Technologies, click Repair All (Exclusive Discount for our readers).
This month, 0 readers have downloaded Restoro.
Most Commonly Asked Questions
Was this page of assistance to you? 770
Thank you very much!
There are insufficient details It’s difficult to comprehend Other Speak with a Professional
Start a discussion.
Windows 10 can’t find Wi-Fi network [STEP-BY-STEP GUIDE] is a problem that many users have experienced. This article will give you the steps to fix this issue. Reference: my computer won’t connect to wifi but other devices can windows 10.
Frequently Asked Questions
Why can I not find Wi-Fi on Windows 10?
A: Unfortunately, there is no way to find out why your Wi-Fi isnt working. However, you can try these methods below if none of them work for you.
Why is my Wi-Fi network not showing up?
A: Your Wi-Fi may not be showing up if you are in airplane mode. Turn off airplane mode to see your Wi-Fi network again.
How do I manually find wireless networks in Windows 10?
A: To find wireless networks, go to the Control Panel. Go to Network and Sharing Center. Select your network from the list of available connections and then click on Manage radio button at top right corner of window that opens up. From here, select Change adapter settings or change connection type from those options below.
Related Tags
- windows 10 no wifi networks found 2021
- windows 10 not showing available networks
- laptop cannot detect home wifi
- network reset windows 10
- network adapter driver windows 10